Engineered & manufactured in Jewar, India · A part of MT&T Group

Rooftop Access

Flowlok Ladder Systems for Vertical Access

The safest roof is one you can reach safely. The TsaF Flowlok ladder system therefore gives industrial and commercial sites a secure, engineered route up to roofs, platforms and plant. We also design it to work with a vertical lifeline.

Flowlok
TsaF's own fixed ladder system
Since 2005
Part of the TsaF range
Lifeline-ready
Works with rope- and rail-type vertical lifelines
TsaF Flowlok ladder with integrated fall-arrest rail on an industrial stack
TsaF Flowlok ladder with rest platform at an industrial plant
TsaF Flowlok cage ladder rising to a stack platform
TsaF Flowlok ladder system on a tall industrial chimney

Access is where many roof falls begin

Every rooftop task starts with getting up there. However, temporary ladders, improvised climbs over parapets and worn fixed ladders are common on industrial sites. In addition, the transitions at the top and bottom of a climb are where workers are most exposed. A permanent, well-designed ladder is therefore the foundation of any roof safety plan, because the lifelines, walkways and barriers on the roof only help if people can reach them safely.

The TsaF Flowlok ladder system

The Flowlok ladder system has been part of the TsaF range since 2005, when TsaF launched its first fall protection systems. It gives safe, secure and reliable fixed access for working at height across industrial and commercial environments. We design each Flowlok ladder for its route: the climb height, the structure it fixes to, the landing at the top and the space around it.

Because ladder height, landing arrangements and fixings vary from site to site, we provide detailed specifications on request for each project. During the survey, our team also explains the Flowlok features that matter for your route.

Flowlok or cage ladder?

TsaF also manufactures the Aluminium Cage Ladder System, a fixed ladder with a protective cage of hoops and straps around the climber. The right choice depends on the climb, the structure and how people will use the ladder. For this reason, TsaF recommends one or the other only after assessing the route.

Combine the ladder with fall arrest

For full protection on the climb, TsaF recommends adding a vertical lifeline system in rope or rail type. It keeps the climber attached to a guided fall arrester from bottom to top. At the roof exit, a rooftop barricade or modular safety barrier then protects the landing. Finally, an aluminium walkway leads onward to the plant.

Why TsaF

We engineer each ladder after a site survey and manufacture it at our Jewar facility. Our certified technicians then install it and train the people who will use it. Because fixed ladders take daily wear, our Annual Maintenance Check also inspects the ladder structure, rungs, brackets and entry and exit sections, and tightens loose connections. Request a site assessment to plan safe access for your roofs.

Specifications are indicative. Refer to the product datasheet or ask our engineers for project-specific values.

System types

Configured for your structure

01

Flowlok ladder

TsaF's Flowlok ladder system for fixed vertical access. We provide specifications on request for each project.

02

Flowlok ladder with vertical lifeline

A Flowlok ladder combined with a TsaF rope- or rail-type vertical lifeline, so the climber has continuous fall arrest.

03

Flowlok ladder with exit protection

A rooftop barricade or modular safety barrier protects the ladder landing, which also links to an aluminium walkway.

How it works

Engineered component by component

FLOWLOK
  1. Route surveyFirst, TsaF measures the climb, the structure, the landing and the clearances around the ladder.
  2. Ladder-to-structure bracketsNext, we design brackets for the wall, tank or frame the ladder fixes to.
  3. Flowlok ladderWe then manufacture the Flowlok ladder for the route, and TsaF technicians assemble it on site.
  4. Entry and exitWe also plan the landing at the top, so the climber can step on and off the ladder safely.
  5. Fall arrestFinally, a vertical lifeline can keep the climber connected for the full height.

Benefits

Why sites choose this system

Permanent safe access

Replaces improvised and temporary ladders with an engineered route, so climbs are safer.

Lifeline-ready

Works with TsaF rope- and rail-type vertical lifelines.

Engineered per route

Height, brackets and exits are designed for each ladder.

Made in Jewar

TsaF manufactures it at its own facility, and certified technicians install it.

Supported for life

TsaF also inspects it every year under the Annual Maintenance Check.

Applications

Where it is used

  • Roof access on factories and warehouses
  • Access to mezzanines and plant platforms
  • Storage tank and silo access
  • Access to rooftop plant rooms and equipment
  • Commercial building roof access
  • Replacement of worn fixed ladders

Industries

Hazards this system controls

Standards applicability. Applicable standards depend on the configuration and components selected — refer to the product datasheet and our engineering documentation for your project.

Installations

On real sites

Keep it fall-arrest ready

Annual Maintenance Check

Documented annual inspection of your flowlok ladder system by the team that built it.

Explore AMC

FAQs

Questions about theFlowlok Ladder System

What is the difference between the Flowlok ladder and the aluminium cage ladder?

Both are TsaF fixed ladder systems for vertical access. The Aluminium Cage Ladder System encloses the climber with cage hoops and straps. The Flowlok ladder, however, is TsaF's own ladder system, so our team explains its features and specifications for your route on request.

Does a fixed ladder need a vertical lifeline?

A ladder gives safe access, but it does not arrest a fall on its own. Therefore, for continuous protection during the climb, TsaF recommends adding a rope- or rail-type vertical lifeline.

Can TsaF replace an existing fixed ladder?

Yes. TsaF can survey an existing ladder and then recommend repair or replacement with a Flowlok or aluminium cage ladder. The survey also covers fixings, the landing at the top and whether to add a vertical lifeline.

Which standards apply to the Flowlok ladder?

TsaF engineering is still confirming the standards for the Flowlok ladder system, so we do not list them here. However, our team can share the documentation for your proposed configuration.

How often should fixed ladders be inspected?

TsaF recommends a formal inspection at least once a year under the Annual Maintenance Check. In addition, users should report damaged rungs or loose brackets immediately rather than wait for the next inspection.

Discuss your site

Get yourflowlok ladder system engineered

“We don't just install your safety system. We stand on the roof with you.”

Request a callback

Leave your number — an engineer will call you back.

We usually respond within one business day. Prefer to talk? Call +91 99587 88970.